Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
andinthefollowingsafe
ty notes.
When installing and o pe
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical data", P age 71 as well as
the instructions in Cha
pter "
Getting started", Page 14.
When setting up the dev
ice, make sure there is clearance all around it so that
the casing receives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
You must remove the
power plug f rom the power socket so that the
mains voltage is c
ompletely disconnected.
Operate the devic
e only with the casing closed.
Replace the lit
hium battery on the mainboard in accordance with the instructions
in "
Repla cing t
he lithium battery", Page 70.
Caution, comp
onents in the system can get very hot.
The activitie
s described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by q ualified technicians.
Incorrect r e
pairs could put the user a t great risk or cause serious damage
to the equip
ment (electric shock, risk of fire).
Transport
ing the device
Device,Trans por
tation
Retransp
ortation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be
used, condensation m ay occur. To avoid damaging the device, wait until it has
reached room temperature and is absolutely dry before initial startup.
10 Fujitsu
To Next Page
Loading...
