Getting started
Connecting external devices
Read the documentation o n the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not co nnect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
Connect and disconnect the cables in the order d escribed below.
Cable connecting
► Switch off all affected devices.
CordCab le
► Remove power plugs from the mains outlets for all device s.
► Plug all cables into the device and periphera ls. Please make sure that you always
observe the safety notes provided in "
Important notes", Page 10.
► Plug all data communication cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in "
Connecting external devices to the USB
ports", Page 20 and in the documentation for the USB devices.
Disconnecting cables
► Switch off al
l affected devices.
Cable
► Remove power plugs from the mains outlets for all device s.
► Unplug all
data comm unication cables from the utility sockets.
► Unplug all cables from th e device and p eriphera ls.
16 Fujitsu
To Next Page
Loading...
