System expansio ns
Removing a board
► Open the casing (see "Opening the casing", Pa ge 36).
Board
► Disconnect the cables connected to the board.
► For long PCI boards: Remove the upper part of the card holder at the front fan in order to be
able to click the board into place at the fro nt fan (see "
Removing the front fan", Page 45).
1
2
► Push the retaining clip (1) towards the s lot cover to u nlock it, then move
it tow ards back panel of the device.
► Pull th e board out of the slot in the dire ction of the arrow (2).
► Place the board in suitable pa ckaging.
Fujitsu 63
To Next Page
Loading...
