Getting started
Connecting a monitor
You can use the monitor po rts o f an optional display adapter in one of the board
slots (1) to connect a monitor to your device.
If you have opted for a device with an integrated display adapter and an optional display
adapter, the integrated display adap ter is first deactivated when the o ption al display adapter
is attached. You need to activate this function first in the BIOS-Setup.
1
1 = Monitor ports of the display adapter
Only attach the monitor to your device when it is switched off.
► Follow the
instructions contained in the monitor manual to prepare the monitor
for operat
ion (e.g. connecting cables).
► Plug the data cable into a suitable monitor port of the device.
18 Fujitsu
To Next Page
Loading...
