System expansions
It may be necessary to modify the entry for the drive in the BIOS Setup.
Removing a hard disk
The p rinciples for installing/removing hard disks for the device as described below are identical
for all types of hard disk. Only the size and alignment of the hard disk in the c asing may
vary (install either horizontally or vertically depending on the hard disk type).
The following images illustrate the installation of a 3
1
/
2
"drive.
Removingtheharddiskdrive
► Open the casing (see "Opening the casing", Page 36).
► Remove the hard disk front panel (see "
Removing the ha rd disk front panel", Page 55).
► Remov e the protective grille (see "
Removing the protective grille", Page 56).
1
1
2
► Press the levers of the EasyChange rails, which are secured to the hard disk
drive, outwards (1) until the hard disk is released.
► Pull the hard disk drive out of the drive cage in the direction of the arrow (2).
58 Fujitsu
To Next Page
Loading...
