System expansions
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive cover for th
e5
1
/
4
inch drive
• Requirement: The casing is open (see section "Opening the casing" , Page 36).
Tousethelatchfunctionof
the accessible 5
1
/
4
inch drive, you must fit the correspo ndin g
drive cover before install
ing the drive in the casing. Proceed as follows:
2
3
1
► Unlock the drive cover (1).
► Push the driv
e metal plate upwards (2) so it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
1
► Connect the
drive cover to the drive (1).
38 Fujitsu
To Next Page
Loading...
