System expansio ns
2
1
► Place the drive cover on the casing (1).
► Slide the d rive cov
er downwards (2 ) so that the drive cover clicks into the catches.
► If necessary, make the required s ettings on th e remaining hard disk drives.
► If you are not inst
alling a new drive, reinstall the cove r (optional) which was
previously remov
ed. The drive bay must be closed off to ensure cooling, to protect
against fire and t
o prevent the entry of fore ign bodies.
► Close the casing (see "
Closing the casing" , Page 37).
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Installing/removing a 3½" reader in a 3½" bay
(optional, SmartCard o r MultiCard)
Operation of the module is not permitted in Taiwan.
You can for i nstance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a m o dule holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device with a SmartCard o r MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard reader, a
blind cover is installed instead of the module holder.
Fujitsu 41
To Next Page
Loading...
