System expansio ns
Installing and removing a board
You can install additional modules in order to increase the performance of your machine.
The number, position and arrangement of the board slots on the mainboard can be found in
the manua l for the mainboard. Boards may already be installed on shipment.
Board,Board,
Installing a board
Always install display adapters with an additional power connection in the
second slot on the right (see following illustration).
► Open the casing (see "
Opening the casing", Pag e 36).
Board
► For long PCI boards: Remove the upper part of the card holder at the front fan in order to be
able to click the board into place at the fro nt fan (see "
Removing the front fan", Page 45).
1
2
► Push the retaining clip (1) towards the s lot cover to u nlock it, then move
it towards the back panel of the device.
► Pull the slot cover out of the slot in t he direction of the arrow (2).
Fujitsu 61
To Next Page
Loading...
