System expansions
1
1
2
3
1
► Push the locking lug on the upper, removable part of the card holder
in the direction of th e arrow (1).
► Lift the card hol
der off the fan (2).
► If boards are fitted at the fan, remove these (3) (see "
Removing a board", Page 63),
1
1
5
2
4
6
3
► Lift the lower locking lugs of the fan slightly (1). At the s ame time, slide
the fan in direction of the arrow (2 ).
► To r
elease the left-ha nd locking lug, push it in the direction of the arrow (3).
46 Fujitsu
To Next Page
Loading...
