Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take no te of when working with your device.
Safety information
SafetyinformationNote
Please note the inform at
ion provided in the "Safety/regulations" m anual
and in th e following safe
ty notes.
When installing and ope
rating the device, please observe the no tes on
environmental conditi
ons in Ch apter "
Technical data", Page 74 as well as
the instructions in Cha
pter "
Getting s tarted", Page 14.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the mon itor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
You must remove the
power plug from the pow er socket so that the
mains voltage is c
ompletely disconnected.
Operate the devic
e only with the casing closed.
Replace the lit
hium battery on the m ainboard in accordance with the instructions
in "
Repla cing t
he lithium battery", Page 73.
Caution, comp
onents in the system can get very hot.
The activitie
s described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect re
pairs could put the user at great risk or cau se serious dam age
to the equip
ment (electric shock, risk of fire).
Transport
ing the device
Device,Tr ans por
tation
Retransp
ortation
Transport all parts separately in their original pa ckaging or in a packaging which
protects them from knocks and jolts, t o the new site.
Do not unpack th em until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it w ill be
used, condensation ma y occur. To avoid damaging the device, w ait until it has
reached room temperature and is absolutely dry before initial startup.
Fujitsu 9