System expansions
Installing an a ccess ible drive
► Fit the drive c over for the 5
1
/
4
inch drive (see "Fitting the dr ive cover for
the 5
1
/
4
inch drive", Page 39).
► If you have already fitted a cover in the bay (optional), remove it.
Do not throw away the cover. For cooling and protection against fire you must refitthe
cover if you rem ove the drive again later (see "
Removing an a ccessible dr ive", Page 41).
1
► Slide the accessible drive toge ther with the attached drive m e tal plate into
the casing until it engag es (1).
► Connect the cables to the drive. M ake sure the polarity is correct.
► Close the casing (see "
Closing the casing", Page 3 4).
It may be necessary to modify the entry for the drive in the BIOS Setup.
40 Fujitsu
To Next Page
Loading...
