Getting started
Connecting a monitor
You c an use the monitor ports of an optional display adapter in one of the board
slots (1) to connect a monitor to your device.
If you h ave opted for a device with an integrated display adapter and an optional display
adapter, the integrated display adapter is first deactivated when the optional display adapter
is attached. You need to activate this function first in the BIOS-Setup.
1
1 = Monitor ports of the d isplay adapter
Only attach the monitor to your de vice when it is switched off.
Use only high-q uality signal lines to connect th e monitors. For the DVI interface,
we strongly recommend DVI monitor cable S26 361-F2391-L400.
► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g . connecting cables).
► Plug the data cable into a suitable monitor port of the device.
Fujitsu 17
To Next Page
Loading...
