Importan t notes
FCC Compliance Statement
CELSIUS systems w hose designation ends with "a" or "an", e.g. CELSIUS M740a,
comply with the standard FCC part 15 according to class A.
If th e device complies with the FCC regulations, the FCC sign can be foun d on the type rating plate.
FCC Class A Compliance Statement
The following statement applies to the product s covered in this manual, unless otherwise speci fied
herein. The statement for other products will appear in the accompanying documenta tion.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules and meets all requireme nts of the Canadian
Interference- Causing Equipment Stand ard IC ES-00 3 for digital apparatu s. These limits
are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency e nergy and, if
not installed and use d in accordance with the instructions, may cause harmful interference to
radio communications. How ever, there is no guarantee that interference will not occur in a
particular inst allation. If this equipment doe s cause harmful interference to radio or television
reception, which can be determined by turning the equipm ent off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and the receiver.
• Connect the equipment into an outlet on a c ircuit different from that to
which the receiver is connected.
• Consult the dealer or a n experienced radio/T.V. technician for help.
Fujitsu Tech nology Solutions Gmb H is not responsible for any radio television interference
caused by unauthorized modifications of this equipment or the s ubstitution or attachment
of conn ecting cables and equipment other than those specified by Fujitsu Technology
Solutions GmbH. The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
12 Fujitsu
To Next Page
Loading...
