Getting started
Settingupthedevice
Workstati onErgonomicDevice
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" m anual.
We recommend that you p lace your device on a surf a ce which i s not slip pery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark th e surface they stand on.
Depending on the location of your device , bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39" should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do n ot cover the ventilation areas
of the m onitor or the device.
A minimum distance of 2 00 mm / 7.87" from the de vice must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient cond itions (see "
Technical data", Page 74,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
Connecting the machine to the mains
Mainsadapt er,
2
1
► Connect the mains cable to the machine (1).
► Plug th
e mains plug into a three-pin socket (2).
Fujitsu 15
To Next Page
Loading...
