Fujitsu CELSIUS M740 - Removing the Module Holder; Screwing the Reader Onto the Module Holder

System expan sio ns
Removing the mod ule holder
• Requirem ent: open the casing (see "Openi ng the casing", P age 33 ).
► Disconnect the cables connected to the module holder.
1
1
2
3
2
► Remove the screws (1) on the module holder.
► Push the module holder a few centimetres out of the casing in th e direction of the arrow (2).
► Pull the module holder completely out of the casing in the direction of the arrow (3).
Screwing the reader onto the module holder
2
2
a
a
1
► With the component side facing downwards,
slide t he reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fasten the r eader with the screws (2).
Fujitsu 43