Fujitsu CELSIUS M740 - Installing;Removing a 3½ Reader in a 3½ Bay (Optional, Smartcard or Multicard)

System expansions
2
1
► Place the drive cover on the casing (1).
► Slide the drive cover downwards (2) so that the drive cover clicks into the catches.
► If you are not installing a new drive, reinstall the cover (optional) which was
previously removed. The drive bay must be closed off to ensure cooling, to protect
against fire and to p revent the entry of foreign bodies.
► Close the casing (see "
Closing the casing", Page 3 4).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Installing/removing a 3½" reader in a 3½" bay
(optional, SmartCard or MultiCard)
Operation of the module is not permitted in Taiwan.
You can for i nst ance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a module holder when installed in the casing.
SmartCard or MultiCard readers can b e mounted on a module holder (optional).
If you have ordered a device w ith a Smar tCard or MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a Sma rtCard or MultiCard reader, a
blind cover is installed instead of the module holder.
42 Fujitsu