Getting s tarted
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
Connectinga USB mouseUSBport
Connecting a USB keyb oard
Use only the keyboard cable supplied.
USBportConnecting
► Plug the rectangular connector of the keyboard cable into the recta ngular socket
on the underside or on the r ear of the keyboard.
► Insert the flat rectangula
r USB plug of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the USB ports
USBdevices,USB port,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the document ation for the USB devices.
► Connect the data cab
le to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the softwa re required is already included
in the operating system. If the device requires separate software, p lease
follow the instructions in the manufacturer’s manual.
To ensure the transmission capacity of USB 2.0, the c able from the external USB
device to the USB port of your d evice must not be longer than 3 m.
18 Fujitsu
To Next Page
Loading...
