Fujitsu CELSIUS M740 - Operation

Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
Device,Monitor,
► Press the O N/ OF F switch on t
he front of the device.

The power indicator lights up and the device starts.
Switching off the device
► Shut d own the operatin
g system in a defined manner. In Windows: via the
Start menu and the Tur
nOffComputerfunction.
Device,Monitor,
or
► Briefly press the ON/OFF switch.
► If the operating sy
stem does not automatically switch the device into energy-saving
mode or sw itch it of
f, press the ON/OFF switch until the device switches off.
Warning, this cou
ld lead t o a loss of data!

If the device is switche d off, the device consumes a minimum of energy.
The ON/O FF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage , remove the power plug fro m the power socket.
► If necessary, switch the monitor off (see the ope rating manual for the monitor).
Fujitsu 21