System expansions
2
1
2
► Slide the drive into the drive c arrier (1).
► Fasten the drive into place with
the screws (2).
2
1
► Push the drive carrier into the c asing until the screw ho les on the casing and the screw
holes on the drive carrier are directly one above the other (1).
► Secure the drive carrier with the screws (2).
► Connect the cables to the drive. M ake sure the polarity is correct.
► Close the casing (see "
Closing the casing", Page 3 4).
It may be necessary to modify the entry for the drive in the BIOS Setup.
36 Fujitsu
To Next Page
Loading...
