System expansions
2
1
► Push the drive carrier into the c asing until the screw ho les on the casing and the screw
holes on the drive carrier are directly one above the other (1).
► Secure the drive carrier with the screws (2).
► If you are not installing a new drive, refit the previously removed cover. Due to cooling, fire
protection and to avoid the penetration of foreign objects, the drive bay must be closed.
► Close the casing (see "
Closing the casing", Page 3 4).
It may be necessary to modify the entry for the drive in the BIOS Setup.
38 Fujitsu
To Next Page
Loading...
