System expansions
For the operation of four 2
1
/
2
" drives, the c onnectors must be replugged as follows:
Assignment 3 Standard assembly
kit:
EP0
EP1
EP2
EP3
EP4/
P0
EP5/
P1
EP6/
P2
EP7
P3
Slot EP4 = Connector P0 (Boot-HDD)
Slot EP5 = C onnector P1
Slot EP6 = C onnector P2
Slot EP7 = C onnector P3
Assignment 3 with connected connectors:
When repluggin
g the cable, proceed as follows:
► Press the lock
ing lugs on the connectors at the old slot inwards and disengage them.
► Remove the connectors from the old slot.
► Replace the c
onnector at the new slot in the correct position.
► To ensure that the connectors engage correctly, always also push the locking lugs outwards.
50 Fujitsu
To Next Page
Loading...
