System expan sio ns
1
2
► Push the mounting clip (1) towa rds the slot co ver to unlock it, then move
it towards the back panel of the device.
► Pull the slot cover out of the slot in the direction of the arrow (2).
Do not throw away the slot cover. For cooling, protection ag ainst fireandinorderto
comply with EMC regulations, you must refit the slot cover if you re move the board.
2
1
► Push the board into the slot (1).
► Swivel th e retaining clam p back ag ain until you feel it click into place (2).
► Connect the ca bles to the board.
► For display adapters with additional power supply: Attach the disp lay adapter
power cable to the power supply.
Fujitsu 61
To Next Page
Loading...
