System expan sio ns
1
► For long PCI boards, refit the upper part of the card holder at the fro nt fan: Insert the upper
part of the card holder in the guide (1) a nd push it to the edge of the guide.
The upper part of
the card holder engages.
► Close the casing (see "
Closing the casing", Page 3 4).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Fujitsu 65
To Next Page
Loading...
