Getting started
Settingupthedevice
Workstati onErgonomicDevice
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend tha t you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark th e surface they stand o n.
Depending on the location of your device, troublesome vibrations and noise s
may occur. To prevent this, a distance of at least 10 mm should b e maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ve ntilation areas
of the monitor or the device.
A minimum distan ce of 20 mm from the device must be observed for ventilation areas.
Do not stack seve ral devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical data", Page 55,
section "Ambient conditions"). Protect th e device against dust, humidity and heat.
Connecting the machine to the mains
Mainsadapt er,
2
1
► Connect the mains cable to the machine (1).
► Plug th
e mains plug into a three-pin socket (2).
Fujitsu Technology Solutions 13
To Next Page
Loading...
