Fujitsu CELSIUS W410 - Installing and Removing the Accessible 5; Inch Drive; Fitting the Drive Cover for the 5 Inch Drive

System expan sio ns
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive c over for th
e5
1
/
4
inch driv e
To use the latch function of the accessible 5
1
/
4
inch drive, you must fit the corresponding
drive cover before installing the drive in the casing. Proceed as follows:
► Open the casing (see "
Opening the cas ing", Page 35).
1
► Remove the drive cover from the bracket in the direction of the arrow ( 1).
1
► Connect the drive cover to the drive (1).
Fujitsu Technology Solutions 37