Fujitsu CELSIUS W410 - Installing the Heat Sink; Mainboard Expansions; Upgrading Main Memory; Replacing the Processor

System expan sio ns
Installing the heat sink
► Open the casing (see "Opening the casing" , Page 35).
Install the heat sink again in the sa me way as it was fitted in the
device at the time of removal.
► Insert the heat sink into the casing. To do this, correctly align the screw holes on
the heat sink w ith t he screw holes on the mainboard.
► Tighten the screws.
► Connect the fan cables to the mainboard.
Mainboard expansions
Details on how to upgrade the main memory or the processor of your device
can be found in the manual for the mainboard.
UpgradesLithium bat teryP rocessorMainmemoryMainboard
Upgrading main memory
► Open the casing (see "Opening the casing" , Page 35).
Mainmemory
► Upgrade the main memory according to the description in th e manual for the mainboard.
► Close the casing (see "
Closing the casing", Page 36).
Replacing the p
rocessor
► Open the casing (see "Opening the casing" , Page 35).
► Remove th e hea
tsink(see"
Removing the heat sink", Page 52).
► Replace the processor as described in the man ual for the mainboard.
► Install the
heat sink again (see "
Installing the heat sink", Page 53).
► Close the casing (see "
Closing the casing", Page 36).
Fujitsu Technology Solutions 53