Fujitsu CELSIUS W410 - Installing a Hard Disk Drive

System expan sio ns
Installing a hard disk drive
► Open the casing (see "Opening the casing" , Page 35).
► Secure the E asyChange rails to the side of the hard disk drive by inserting the upper
pins of the EasyChange rail in the corresponding holes of t he hard disk.
1
► Slide the h ard disk drive with the EasyChange rails into the drive cage in the direction of the arrow
(1). Check that the component side of the hard disk drive faces inwards towards the casing floor.
► Connect the cables to the hard disk drive.
► Close the casing (see "
Closing the casing", Page 36).
It may be necessary to modify the entry for the drive in the BIOS Setup .
Fujitsu Technology Solutions 47