Fujitsu CELSIUS W410 - Operation; Switch the Device on; Switching off the Device

Operation
Operation
Switch the device on
► If necessary, switch the monitor on (see the operating manual for the monitor).
Device,Monitor,
► Press the ON/ OF F switch on t
he front of the device.

The power-on indicator glows white and the device is s tarted.
Switching off the device
► Shut down the operatin
g system in a de fine d mann er. In Windows: via the
Start menu and the Tur
nOffComputerfunction.
Device,Monitor,
or
► Briefly press the ON/OFF s witch.
► If the operating sy
stem does not automatically switch the device into energy-saving
mode or sw itch it of
f, press the ON /O FF switch until the device switches off.
Warning, this cou
ld lead to a loss of data!

If the device is switched off, the device consumes a minimum of energy.
The ON/OFF switch does no t disconnect the device from the mains voltage . To
completely disconnect the mains voltage, remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
Fujitsu Technology Solutions 21