Operation
Indicators on the device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the configuration level you have selected.
1
2
3
4
No. indicato r Description
1 Drive indicators
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
2
Indicator for
optional
components, e
.g.
SmartCard re
ader
The indicator lights up when the optional component, e.g. the
SmartCard r eader, is accessed.
3 Power-on in
dicator
Caution: In energy-saving mode the device must not be switched
off with the main power switch (if present) or disconnected from
the mains, as this may result in data loss.
• The indicator lights up white:
The de vice is switched on.
• The indicator fl ashes white (depending on device type ):
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it e ntered energy-saving mode.
• The indicator is not illuminated:
The device is switched off (disconnected from the mains). If the
device is ready it can be switched on with the ON/OFF switch.
4 Hard disk indicator
The indicator lights up blue when the hard d isk drive of the device
is accessed.
During operation, an optical light gu ide also lights up above the USB
and audio ports on the front of the device.
22 Fujitsu Technology Solutions
To Next Page
Loading...
