Fujitsu CELSIUS W410 - Removing the Hard Disk Drive

System expansions
Removing the hard disk drive
► Open the casing (see "Opening the casin g", Page 35).
1
1
2
► Slightly press together the EasyChange rails mounted on the h ard disk drive (1) and pu ll
the ha rd disk drive slightly out of the drive cage in the direction of the arrow (2).
► Disconnect the cab
les connected to the hard d isk drive.
► Slightly press together the EasyChange rails m ounted on the hard disk drive (1) and pull the
hard disk drive completely out of the drive cage in the direction of the arrow (2).
► Pull the EasyChange rails off the hard disk drive.
► If you no longer need the EasyChange rails, secure them ag ain at their location in the drive cage.
It may be necessary to modify the entry for the drive in the BIOS Setup.
48 Fujitsu Technology Solutions