Getting s tarted
Connecting a monitor
Depending on requirements, you c an use the monitor ports of the m a inboard (1) or the monitor p orts
of an optional display adapter in one of the board slots (2) to connect a m onitor to your device.
1
2
1 = Mainboard monitor ports 2 = Monitor ports of the display adapter
► Follow the
instructions conta ined in the monitor manual to prepare the monitor
for operat
ion (e.g. connecting cables).
► C onnect the data cable to a suitable monitor port of the device (VGA, DVI-I, DisplayPort).
► Plug the
monitor power cable into the grounded mains outlet.
Connecting the mouse
Depending on the equipment level selected, your device w ill be sup plied with
a USB mouse or a PS/2 mouse.
Mouse,Connecting,
Connecting a USB mouse
► C onnect the USB m ouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by t he device if you connect the mouse when
the device is switched off and then switch the device on again.
► S
witch y our device off.
I
f you do not attach a mouse to the PS/2 mouse port, you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
► Connect th e PS/2 m ouse to the PS/2 mouse port of the device.
PS/2mouse,Connecting,PS/2mouse,
► Sw itch your device on again.
16 Fujitsu Technology Solutions
To Next Page
Loading...
