System expan sio ns
Removing a board
► Open the casing (see "Opening the casing" , Page 35).
Board
► Disconnect the cables connected to th e board.
1
2
► Swivel the retain
ing clamp (1) around towards the b ack wall of the device.
Boards in the P CI
-Express x16 slot are additionally secure d to the slot at the
bottom with a pl
astic catch. Push the plastic catch to the side to release the
card. You can th
en remove the card as described below.
► Pull the board o ut of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
Fujitsu Technology Solutions 51
To Next Page
Loading...
