System expansions
Do not throw away the slot cover. For cooling, p rotection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board .
2
1
► Push the board into the slot (1).
► Sw ivel the reta
ining clamp back again until you feel it click into place (2).
► If necessary, c onnect th e cables to the board .
► Close the casin
g(see"
Closing the casing", Page 36).
If you have ins
talled or removed a board, please check the relevant PCI
slot setting
sintheBIOS Setup. If necessary, change the settings. Further
information
is provided in the PC I board documenta tion.
50 Fujitsu Technology Solutions
To Next Page
Loading...
