Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the inform at
ion provided in the "Safety/regulations" manual
and in th e following safe
ty notes.
When installing and ope
rating the device, please observe th e no tes on
environmental conditi
ons in Ch apter "
Technical data", Page 54 as well as
the instructions in Cha
pter "
Getting started", Page 13.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated v oltage used by the
device is set to the
local mains voltage.
You must remove the
power plug from the power socket so that th e
mains voltage is c
ompletely disconnected.
Caution, compone
nts in the system can get very hot.
The activities
described in these instructions must always be
performed with
the greatest care.
Repairs to the
device must only be performed by qualified technicians.
Incorrect rep
airs could put the user at great risk or cause s erious damage
to the equipm e
nt (electric shock, risk of fire).
Transportin
g the device
Device,Tr ansp ort
ation
Retranspo
rtation
Transport a ll parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be
used, condensation may occur. To avoid damaging the device, wait until it has
reached room temperature and is absolutely dry before initial startup.
Fujitsu Technology Solutions 9
To Next Page
Loading...
Need help?
General