Getting started
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
Connectinga USBmouseUSBport
Connecting a USB keyboard
Only use the keyboard cable supplied with th e keyboard (not within the delivery scope of the device).
USBportConnecting
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Insert th e fl at rectangula
r USB plug of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, sca nner, modem or keyboard).
USB devices are hot-pluggable. This means yo u can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cab
le to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
The external USB devices you connect to the USB ports usually require no
driver o f their own, as the required software is already included in the operating
system. However, if the external USB dev ice requires its own software, please
install it from the data carrier provided with the USB device.
To ensure the USB transmission capacity, the cable from the external USB device
to the USB port of your device must not be longer than 3 m.
Fujitsu Technology Solutions 23
To Next Page
Loading...
Need help?
General