System expansio ns
Prepare to remove components
Please observe the safety information in chapter "Important notes", Page 9.
Remove the power plug from the mains outlet!
► Switch the device off.
The device must not be in energy-saving mode !
► Remove all the cables from the device.
► Place the device on a sta
ble, flat and clean surface. If necessary, lay an anti-slip cloth
on this surface to pre
vent the device from being scratched.
Opening the casing
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
1
3
2
► Press the release button on the rear of the device upwards (1) and at the same
time slide the casing cover in the direction of the arrow (2).
► Lift t
he casing cover off the device (3).
Fujitsu Technology Solutions 45
To Next Page
Loading...
