Fujitsu ESPRIMO Q5 Series - Preparation for Component Removal; Opening the Computer Casing

Troubleshooting and tips
Cause
Remedy
Wrong monitor has been set under Window XP ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting th e operating system
appears.
► If the menu for selecting the operating
system appears, press
F8
.
► SelectSafe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, T hemes, Settings
to set the correct values for the connected
monitor as described in the operating
manual of t he monitor.
Wrong mo nitor has been set under Windows 7 ► Restart the device.
► Press
F8
while the system is booting.
Either the Windows Advanced Start Options menu
or the menu for selecting th e operating system
appears.
► If the menu for selecting the operating
system appears, press the
F8
key.
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected m onitor as
described in the operating manual of the
monitor.
No mouse pointer displayed on the screen
Cause
Remedy
The mouse is not correctly connected.
► Shut down your operating system in the
proper mann er, for instance using
Ctrl
+
Alt
+
Del
.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
Fujitsu Technology Solutions 41