Operation
Starting the BIOS S etup Utility
► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
The following or a similar display appears on the screen at start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a password has be en assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your s ystem administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the
F1
key to display help on the ope ration of the BIOS Setup Utility. The description
of the individual settings is shown i n the right-hand window of the BIOS Setup Utility.
With the
F9
key you can load the default settings of the BIOS Setup Utility.
► Use the cursor keys
←
or
→
to select the menu you wish to access to make changes.
The m enu is displayed on the screen.
► Select the option you want to change with the cursor keys
↑
or
↓
.
► Press the Enter key.
► Press the
ESC
key to exit the selected menu.
► For future referen ce, make a note of the changes you have made (for example, in this manual).
Exiting BIOS Setup Utility
BIOSSetupUtility
You need t o select the de sired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
► To save the current menu settings and exit the BIOS Setup Utility,selectExit Saving Changes and Yes.
The device is rebooted and the new settings come into effect.
Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
► To d iscard the c hange s, select Exit Discarding Changes and Yes.
The settings which applied when BIOS Setup Utility wascalledupremaineffective.
The BIOS Setu p Utility is terminated and the device is rebooted.
Fujitsu Technology Solutions 35
To Next Page
Loading...
Need help?
General