8.1.2.4 LUN Group Addition
Add a group of volumes that can be recognized by the host (LUN group).
For each LUN group, volume numbers are assigned for the Logical Unit Numbers (LUNs) that are recognized
by the host.
The procedure to create a LUN group is as follows:
1 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the [Connectivity]
screen, click [LUN Group] in [Category].
The [LUN Group] screen appears.
2 In [Action], click [Add LUN Group].
The [Add LUN Group] screen appears.
3 Enter the LUN group name in [LUN Group Setting]. Click the [Add] button in [Define LUN Group].
The [Add LUN] screen appears.
4 Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN Setting],
select the number for the first volume to be allocated, and click the [OK] button.
Chapter 8 SAN Connection Settings
8.1 Connection Settings for the ETERNUS DX
111
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0
To Next Page
Loading...
