Fujitsu ETERNUS DX60 S3 - Chapter 1 Component Names; Controller Enclosures; Front; Figure 1.1 Front View of a 2.5 Type Controller Enclosure

Chapter 1
Component Names
This chapter provides component names of the ETERNUS DX.
1.1 Controller Enclosures
An operation panel and drives are installed in the front of the controller enclosure. Controllers and power
supply units are installed in the rear.
1.1.1 Front
This section provides the names of the components in the front of a controller enclosure.
■
2.5" Type
Figure 1.1 Front View of a 2.5" Type Controller Enclosure
1
3 3
2
1. Operation panel
2. 2.5" drive
3. Flange cover
18
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0