10.2 RAID Group Check
On the [RAID Group Details] screen of ETERNUS Web GUI, the status of RAID groups that you have created is
displayed. Check if RAID configuration is set correctly.
To display the [RAID Group Details] screen, click the [RAID Group] tab on the navigation of the ETERNUS Web
GUI screen. In the [RAID Group (Basic Information)] screen that appears, select which RAID group to check
the information for and click the No. or name of this RAID group.
10.3 Volume Check
On the [Volume Details] screen of ETERNUS Web GUI, the status of volumes that you have created is dis-
played. Check if volumes are set correctly.
To display the [Volume Details] screen, click the [Volume] tab on the navigation of the ETERNUS Web GUI
screen. In the [Volume (Basic Information)] screen that appears, select which volume to check the informa-
tion for and click the No. or name of this volume.
Chapter 10 System Status Check
10.2 RAID Group Check
148
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0
To Next Page
Loading...
