Fujitsu ETERNUS DX60 S3 - Chapter 10 System Status Check; Component Status Check

Chapter 10
System Status Check
Check the status of the ETERNUS DX on the ETERNUS Web GUI screen or ETERNUS CLI.
10.1 Component Status Check
The status of the ETERNUS DX can be checked by general status in the upper left of the ETERNUS Web GUI
screen.
When the general status image is " ", the ETERNUS DX is in normal status. When the general status
image is other than " " (" ", " ", etc.), an abnormality has been detected in the ETER-
NUS DX. Check the status of each component on the [Storage] screen.
If there is a component in Warning or Error status, contact your sales representative or maintenance engi-
neer.
147
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0