Fujitsu ETERNUS DX60 S3 - When 1 U Power Distribution Unit Is Installed (for Regions Other than EMEA&I)

Do Not
• Do not use the server service outlet to connect a power cord for the ETERNUS
DX.
4.4.2 When 1U Power Distribution Unit is Installed (for Regions Other than EMEA&I)
The following procedure explains how to connect the power cord when a 1U power distribution unit is instal-
led.
To help with power cord management and prevent incorrect connections, attach labels to the power cords
and make a note of connection origins and destinations.
1 Remove the power cord clamp from the power distribution unit.
Power distribution unit
Power cord clamp
Chapter 4 Connecting Cables
4.4 Power Cord Connection
51
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0