Fujitsu ETERNUS DX60 S3 - LAN Related Specifications; Table 3.2 LAN Port Availability

3.4.2 LAN Related Specifications
■
Network Communication Protocols
The usable LAN ports and functions are different depending on the usage and protocol.
The following table shows how the LAN ports may be used (by usage and protocol).
Table 3.2 LAN Port Availability
Usage Protocol tcp / udp
Port
number
Direction
Master CM Slave CM
Remarks
MNT RMT MNT RMT
ETERNUS Web GUI http /
https
tcp 80 / 443 from
¡ ¡
△ (*1) △ (*1) Accessed
from a
Web
browser
ETERNUS CLI telnet /
ssh
tcp 23 / 22 from
¡ ¡
△ (*1) △ (*1) −
ftp (cli-
ent)
tcp 21 to
¡ ¡
△ (*1) △ (*1) −
SNMP agent snmp udp 161 from
¡ ¡ ¡ ¡
−
trap snmp
trap
udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
SMI-S http /
https
tcp 5988 /
5989
from
¡
´ ´ ´
Used for
SMI-S cli-
ent com-
munica-
tion
E-mail smtp (cli-
ent)
tcp 25 (*3) to
¡ (*2) ¡ (*2)
´ ´
Used for
failure
notifica-
tion, etc.
NTP NTP (cli-
ent)
udp 123 to
¡ (*2) ¡ (*2)
´ ´
−
REMCS
(remote support)
smtp tcp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
Used for
failure
notifica-
tion, etc.
http (cli-
ent)
tcp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
Used for
firmware
down-
load, etc.
AIS Connect (remote
support)
https (cli-
ent)
tcp 443 to
¡ (*2) ¡ (*2)
´ ´
—
Syslog
(event notification
and audit log send-
ing)
Syslog udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
RADIUS Radius udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
ping ICMP − − from
¡ (*2) ¡ (*2)
´ ´
−
ETERNUS DX Discov-
ery
Unique
protocol
udp 9686 from
¡
´ ´ ´
−
¡: Possible / △: Partially possible / ´: Not possible
Chapter 3 Checking the Configuration Environment
3.4 LAN Connection Preparation for Operation Management
44
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0