Fujitsu ETERNUS DX60 S3 - Page 134

2 [New Simple Volume Wizard] appears. Click the [Next] button.
3 Without changing the default settings of [Specify Volume Size], click the [Next] button.
4 Assign a drive letter in [Assign Drive Letter or Path] and click the [Next] button.
Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
134
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0