Fujitsu ETERNUS DX60 S3 - Page 35

5 Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack pillar.
M5 screws
M5 screws
6 Attach the flange cover.
Chapter 2 Rack Installation
2.3 3.5" Type Drive Enclosure Installation (for Regions Other than EMEA&I)
35
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0