(2) In the [Download MIB File] screen, set the required items and click the [Download] button.
Select the "The ServerView control code is added to the comment line of the MIB definition file"
checkbox when downloading the MIB file for monitoring the ETERNUS DX by ServerView.
A confirmation screen appears.
(3) Click the [OK] button.
A dialog box to download the file appears.
(4) Click the [Save] button.
The MIB file is saved.
(5) Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
Chapter 6 Monitoring Settings
6.2 Various Notification Settings
88
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0
To Next Page
Loading...
