Fujitsu fi-6800 - 7.3 Troubleshooting

Index
Introduction
Chapter 7 Troubleshooting
Appendix
Glossary
Contents
TOP
114
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Operational
Settings
Replacing
Consumables
Scanner
Overview
Troubleshooting
This section describes troubles that may occur while using the
scanner, and the troubleshooting methods. Please check the
following items before you request a repair. If the problem
persists, check each item in "7.4 Before You Contact the Scanner
Service Provider" (page 128)
, and then contact your FUJITSU
scanner dealer where you purchased the scanner, or an
authorized FUJITSU scanner service provider.
The following are examples of troubles that you may
experience:
7.3 Troubleshooting
Symptoms
"Scanner cannot be powered ON." (page 115)
"Display on LCD switches OFF." (page 116)
"Scanning does not start." (page 117)
"Quality of the scanned photo/picture is poor when scanning in black &
white." (page 118)
"Quality of scanned text or lines is unsatisfactory." (page 119)
"Images are distorted or not clear." (page 120)
"Vertical streaks appear on the scanned image." (page 121)
"Multifeed error occurs frequently." (page 122)
"Situation in which the document is not fed into the ADF occur
frequently." (page 124)
"Paper jams/pick errors occur frequently." (page 125)
"Scanned images turn out elongated." (page 126)
"A shadow appears on the leading edge of the scanned image." (page
127)