Fujitsu fi-6800 - The Operator

Introduction
Chapter 2 How to Load Documents
Appendix
Glossary
Index
Contents
TOP
35
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
How to Load
Documents
3 Adjust the hopper side guides to the document width.
Move the hopper side guides towards the center as you press the
side guide clutches, and leave no space between the hopper side
guide and the widest document.
4 Lock one of the hopper side guides.
In this case, lock the hopper side guide on the right side by sliding up
the side guide lock.
Make sure that all documents are placed underneath the
pick roller, otherwise the document will not be picked.
 Good example
 Bad example
Pick Roller
Pick Roller
Hopper Side Guide
Side Guide Lock
locked