Introduction
Chapter 2 How to Load Documents
Appendix
Glossary
Index
Contents
TOP
34
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
How to Load
Documents
3 Adjust the stacker extension to the document length, and
pull up the paper stop.
For information on how to set the stacker, refer to "1.8 Stacker
Setting" (page 23).
4 Start up an application for scanning and perform a scan.
■Setting the documents by the left or right side
of the hopper
1 Slide the hopper side guides to their outermost positions.
2 Set the documents so that the smallest document can be
picked by the pick rollers.
Set the documents with the front side (scanning side) facing up.
To Next Page
Loading...
